SCQT Quarter Turn Low-Height Wing Head
This Spanclamps Part # SCQT0610-LH is a quarter turn low height wing head. This clamp has a low-height knob head and bears indications showing if the clamp is open or closed. The clamp is furnished with 3 socket head cap installation screws of M2x0,4 - 5 mm. The receptacles that can be used with this clamp are
Recommended ReceptacleSCQTRBI10 SCQTR0610 SCQTRBI10-S SCQTR0610-S
Installation instructions SCQT0610-LH plate thickness is 6 mm (Figure A)
Installation instructions SCQT0610-LH plate thickness is between 6 and 10 mm (Figure B)
SpanClamps Part No. is factory new.
SpanClamps Part No. has a certificate of Quality, and certificate of Conformity.
*Shear & Tensile Strength are static loads. Fastener will break when it receives this load. When the two plates receive a tensile load bigger than the fastener's clamping force, there will be a gap between the plates.
Maximum dynamic loads are currently set at 1/4th of the static loads, this needs to be life tested in the customer application.